CLEN Intelligent Auto Pulse Battery Desulfator to Revive and Regenerate the Batteries for Lead Acid Batteries
- Brand: CLEN
- Product Code: 1646341101
- Availability: In Stock
- Ex Tax: $28.00
CLEN Lead Acid Battery DesulfatorUS$ 24.80/piece
CLEN VAM90100P Voltmeter MeterUS$ 29.80/piece
12V 8A Car Battery ChargerUS$ 38.80/piece
CLEN 12V Lead-Acid Battery Fuel GaugeUS$ 10.99/piece
24V 2A/4A/8A Battery ChargerUS$ 58.20/piece
6V/12V 1A/2A/3A/4AUS$ 38.80/piece
400Ah Battery DesulfatorUS$ 21.80/piece
5pcs/lot 60V 100A Watt MeterUS$ 85.00/lot
pieces / lot
Kind Note:there has three kinds terminal,if you dont choose,we will send randomly!
Batteries often fail because “sulfates” slowly develop and cover the battery plates. This sulfating process also weakens the electrolyte and this combined with the gradual coating of the plates slowly and almost imperceptibly reduces the battery’s ability to receive, store and then deliver power. This sulfating process gradually impairs battery function and causes a capacity loss until the battery can no longer perform the desired task and so the battery is deemed to have “failed”. However using an Auto Pulse Battery Desulfator can reverse the process by dissolving the sulfates, cleaning the plates and restoring the electrolyte strength so improving a battery’s life and capacity for an extended period.
The High-frequency Peak Pulse delivers an electronically controlled pulse to the battery causing crystalline sulfates to dissolve back into the electrolyte and so restoring battery function and electrolyte strength regaining the batteries ability to receive charging current and deliver discharge current.
• Automotive batteries • Motorbike batteries • Marine, jetski batteries • Truck, RV batteries • Electric golf carts • Electric cars and scooters • Electric bicycles • Electric wheelchairs • Earthship / off-grid battery banks • UPS battery banks • DC systems of electrical substations • Telecommunication hubs • Wind farm storage systems • Solar farm storage systems • Back-up system battery banks • DC starting systems of generators
Many desulfator products use an old technology inductor design to generate the pulse to desulfate a battery. This old technology creates a harsh inductor peak that can be damaging to the battery plates.
Utilising our new capacity pulsing method a “soft” peak is generated so dissolving sulfates without damaging the battery plates.
Old technology also requires a large inductor so necessitating a physically large desulfator device whereas using our advanced technology design the Auto Pulse Desulfator device is very compact yet provides BIG performance.
NEW CYCLIC PULSING FUNCTION
In a similar manner to a Pulse battery charger (charge – rest –charge – rest etc) a cyclic desulfating pulse function (pulse – rest – pulse – rest etc) optimizes a batteries recovery process. This method of desulfation has been implemented in the new Auto Pulse Desulfator
AUTO PULSE DESULFATOR BENEFITS
Increases Battery Power
Extends Battery Life
Battery Charge Faster
Prevents Sulfate Build-up
Fully Automatic voltage selection. 12V 24V 36V and 48V
New Cyclic pulse generation method for improved capacity recovery
Soft” Peak Pulsing
Auto cutoff function to prevent over discharge of battery
User Configurable override for manual voltage selection
Just Red terminal connect to battery positive and black terminal to battery negative. And Auto Pulse Battery Desulfator can cutoff when battery’s voltage is low.
MANUAL VOLTAGE SELECTION
If the battery voltage is very low the automatic voltage selection may fail to set the correct voltage. In this instance it is possible to manually set the desired operating voltage. By pressing the voltage select button. The LED screen will first display the working voltage and if you want to then alter the working voltage setting just presses the key again and the unit will change to next value. After setting the desired voltage the display will switch off to conserve battery power.
CUT OFF VOLTAGE
Auto-setting for 12-48V battery
Working Amp: 20mA max
Peak Amp: 2A max
Peak Voltage: 60-100V
Pulse Frequency: 10,000HZ
LED light indicates when pulse working
Cutoff amp: <5mA
Weight: 120g, including inner package
THREE TERMINAL CHOOSING
CLEN-A, B, C directly connect to the battery by the terminal.
CLEN-1-A, B, C connect between the charger and battery box plug. Input side is be plugged in by charger terminal, and the desulfator’s out side is same the charger terminal.
The Service We Provide - We Take Care Of Your Order
Punctual delivery time:
• We put your order into our tight production schedule, ensuring your punctual delivery time.
• Production / inspection report before your order is packed
• Shipping notice/ insurance to you as soon as your order is shipped.
After sales service:
•We respect your feedback after receiving the goods.
•We provide 12-24 months warranty after goods arrive.
•We promise all spare parts available in lifetime use.
•We forge your complaints within 48 hours.
•We value every inquiry sent to us, ensuring quick competitive offer.
•We cooperate with customers to bid tenders. Provide all necessary documents.
•We are a sales team, with all technical support from engineer team.
International Express: FedEX, DHL,UPS,TNT and others.
Air & Sea Transportations
|Application||Battery Desulfator, Battery Reviver, Battery Regenerator|
|Suitable battery||Lead Acid Batteries|
|Suitable capapcity||Below And Around 200AH|
|Socket Standard||3 Kinds|
|Place of Origin||China (Mainland)|
|Package Weight||0.200kg (0.44lb.)|
|Package Size||10cm x 6cm x 4cm (3.94in x 2.36in x 1.57in)|